A wireless and WiFi repeater will repeat the initial network to a larger area. It also allows us to connect more number of devices. When the user clicks on any wrong setting and don’t know how to reverse it the only thing we do is the reset. So here, we are going to see how to do the reset in some easy steps. Even the wireless n wifi repeater login will be explained.
Reset of Wireless n WiFi Repeater
By following these steps mentioned below you can reset your
repeater.
1. Locate
the reset button at the back of the repeater. It can also be in the front of
the repeater. This could vary from model to model.
2. Now,
with the help of a paper clip or any such object press the reset button.
3. When
all the LED lights blink, release the reset button.
After reset now your need to again login to your repeater
and set it up.
Login in Repeater
By following these steps mentioned below you will easily be
able to login to your Wireless n WiFi repeater. By the help of the IP address
which is 192.168.10.1 wifi repeater setup would be done.
1. Connect
your device to the repeater’s network.
2. On
the connected device, open a web browser, type 192.168.10.1 in the search bar
and click on Enter.
3. Enter
the default password and username. It would be mentioned on the user manual or
on the label of the repeater. Then click on Submit
4. Select
wizard>repeater.
5. Select
an SSID of the repeater and enter the security key.
6. Click
on apply.
After the login, the second step is to change the password
as the default password is too easy to guess.
Password Change of Repeater
To change the default password of the wireless n WiFi
repeater, follow the mentioned steps.
1. Turn
on the device which is connected to the repeater’s network.
2. Open
the web browser and in the address bar type myrouter.local and click on Enter.
3. The
login screen appears.
4. Enter
the user name and the default password. They would be mentioned in the user
manual or on the label.
5. Then
go the wireless settings option, choose the option to change the password.
6. Then
enter your new password to change the default password.
7. Then
click on the save option.
8. After
this, you can once log out and try to login with the new password just to check
if the new password is set.
To access the login interface, 192.168.10.1 or myrepeater.net
setup can be used. After the password change, you need to update the
outdate firmware of the Wireless n Wifi repeater
Password change of Wireless n WiFi Repeater
To update to the newest version of the firmware do read and
follow the steps mentioned below.
1. On
the device which is connected to the repeater’s network, open the web browser.
2. In
the address bar type 192.168.10.1 and press Enter.
3. Enter
the username and the password. If you haven’t changed the password then the
default password username would be mentioned on the label or in the user
manual.
4. Then
go the advance tab and under that go to the firmware update option.
5. Click on the browser option and select the
downloaded file of the firmware.
6. Then
click on the update option and the update will start.
7. Once
the update is completed, then your repeater will automatically reboot once.
So now you update is completed. Just see that the update is
not interrupted by any means
The Conclusion
We wish by reading the mentioned steps and methods or the
reset, login, password change and firmware update was done. Please read and
follow the steps as told to do it without any mistake.
.jpg)
